Signamax # 065-1696SFPDR 10/100/1000BaseT/TX to Dual-Rate 100Base or 1000Base OAM Managed SFP Media Converter

$330.98

Signamax # 065-1696SFPDR 10/100/1000BaseT/TX to Dual-Rate 100Base or 1000Base OAM Managed SFP Media Converter

Category:

Description

Signamax # 065-1696SFPDR 10/100/1000BaseT/TX to Dual-Rate 100Base or 1000Base OAM Managed SFP Media Converter

The Signamax 10/100/1000 to 100/1000 OAM Managed SFP Media Converter provides a flexible and intelligent managed solution for long distance connections between legacy 10BaseT and 100BaseTX networks and either 1000Base Gigabit Ethernet fiber or 100Base fiber networks. The built-in 10/100/1000 switch enables the fiber cable connection to operate at 1000 Mbps, while remaining completely 1000BaseSX/LX or 100BaseFX/BX standard-compliant for the fiber optic connection. This OAM Managed Dual Rate Media Converter can be monitored and configured through management via SNMP and a Web-based Graphical User Interface.

The dual-rate fiber converter includes the ability to force the RJ-45 port to 100Base or 10Base full or half-duplex modes where required. The Link Fault Signaling provides a means of propagating a link drop on either port of the media converter to the other port, enabling a connected managed switch to see the link drop and respond to it using Spanning Tree Protocol or another recovery scheme. The built-in switch and its store-and-forward switching architecture performs the network segmentation that allows the maximum fiber distance extension.

  • Dual-rate 1000Base or 100Base SFP capability
  • IEEE 802.3ah OAM management standard supported
  • Supports SNMP v1 & v2c management
  • Supports Q-in-Q double tagged frame transparent
  • Supports in-band loop back and diagnostic
  • Gigabit transmission supports 9K bytes jumbo frames
  • IEEE 802.3x flow control for full duplex and back pressure for half duplex supported
  • Full wire-speed forwarding rate
  • Supports wall mounting, DIN-rail mounting or use with media converter rack mount chassis
  • APPLICABLE STANDARDS

IEEE 802.3 10BaseT IEEE 802.3u 100BaseTX IEEE 802.3ab 1000BaseT IEEE 802.3z 1000BaseSX IEEE 802.3z 1000BaseLX IEEE 802.3x Flow Control IEEE 802.3ah Operations, Administration, and Maintenance (OAM)

  • PORTS

1 – RJ-45 10/100/1000BaseT/TX Auto-Negotiation, Auto-MDI/MDIX port, plus 1 – Dual-rate 100Base or 1000Base SFP port.

  • LED STATUS INDICATORS

Per Unit: Power; LFS Status; Full Duplex; OAM Loop Per RJ-45 Port: Link Copper; Copper port speed (Green = 1000 Mbps, Amber = 100 Mbps, off = 10 Mbps) Per SFP Port: Link Fiber

  • PERFORMANCE

Latency: ≤1.6 μs (FIFO). MTBF: 1,857,775.35 hours (212.07 years), calculated via the Part Stress Analysis Method. Throughput, per port: @ 1000Base: 1,488,100 pps (64-byte packets); @ 100Base: 148,810 pps (64-byte packets) Switch Fabric Speed: 4.0 Gbps (non-blocking, wire speed performance) Frame Buffer: 12K total Jumbo Frame Support: 9K packets supported

  • VLAN CAPABILITIES

IEEE 802.1Q Tag-based VLAN supported; up to 4K active VLANs possible Supports Q-in-Q Double Tagged Frame Transparent

  • MANAGEMENT

IEEE 802.3ah OAM supported. Access Methods: Via SNMP agent and Web browser. Software Upgrade Capability: Via TFTP SNMP v1 and v2c Network Management supported. Supports In-Band Loop Back and Diagnostic.

  • ELECTRICAL CHARACTERISTICS

12 V DC. External 100 – 240 V AC 50/60 Hz. Power supply included.

  • ENVIRONMENTAL REQUIREMENTS

Operating Temperature: 32°F to 122°F (0°C to 50°C); Storage Temperature: -14°F to 158°F (-10°C to 70°C) Relative Humidity: 5% to 95% (non-condensing)

  • PHYSICAL CHARACTERISTICS

Dimensions: 4.33” L x 3.16” W x 0.91” H (109.2 mm x 83 mm x 23.8 mm) Weight: 0.33 lb (150 g)

  • CERTIFICATIONS

CE, FCC, ROHS, VCCI Class A

  • WARRANTY

Limited Lifetime